The 3rd Rockers.

Jonathon I had the pump adjusted on my 75 series last week.
They put it on a dyno and fiddled about until they got max HP without smoke at around 2000.
It got 62 HP at the rear wheels at 1800

Just an idea

Custom rear Exhaust Pipe with Offset Straigh Through Silencer from Mr. Muffler. $190.00

This morning I received Rancho RS5143 and 0-500kg load Leaf Springs. $700.00

Rear Suspension has now been replaced.

Just got off the Phone(0011 1 360-893-0235), 30 Spline Longs are on their way. US$800.00

good work you wont be breaking another CV in a while

bring on the tranny gears

30 spline longs?????????????????????????????????????????????????

what am i missing???

god i'm running standard CV's, front lockright, Q78's and a petrol engine

The Longfields arrived this morning. Total cost $945.93

AUS or US dollars? including shipping???

shit that's a bargan and a half... now where did i put that last credit card application form

Delivered by USPS in just under four days.
Overall cost was indeed $945.93 including a FOREIGN CURRENCY TRAN FEE of $13.98 on my National Australia Bank American Express.

I've also spent $269.00 on stuff from Marlin.

dammit, why'd i pay the bond on this house.... i coulda had longs

Mr F you have done bloody well there - foreign currency player

what did you get from Marlin??

please say toybox or duals

$269 on marlin ???

http://www.alltackle.com/striped_marlin_II.JPG


on a serious note... what is marlin?

tehy make some pretty cool stuff for lux's and cruisers

http://www.marlincrawler.com/

Heavy Duty Front Inner Axle Seals
Front Axle Outer Snap Ring
Spindle Nut Kit
Heavy Duty Shifter Seat & Shifter Socket

The Car is now back together, the 30 Spline Longfield longside axle was an absolute mongrel to get in.

New parts include, Marlin's super duper Inner Axle Seals, Bobby's 30 Spline set, Disc Brakes Australia DBA154S(L/R) Slotted Rotors, Wheel Studs, Spindle Bushes, Wheel Bearings, Ferodo DB288Z Thai Brake Pads, AVM Free Wheeling Hubs and Don Kyatt's SH3.

Don Kyatt
AVM Free Wheeling Hubs AVM421 $198.00
Steering Knuckle Kit SH3 $88.484
Spindle Bushes 90999-70067 $54.45 for two
Wheel Bearings WBK2 $86.218 for two
Cartridge of Grease FHC $22.275 for three
Tub of Grease FH2.5K $34.65

Repco
Left Rotor DBA154SL $114.00
Right Rotor DBA154SR $114.00
Anaerobic Gasket Goo Loctite 518 $30.99

Super Cheap Auto
Brake Pads DB288Z $39.99
Cartridge style Greasegun $52.49

Toyota Dealership
Wheel Studs TO-9094202053 $60.72 for twelve

Marlin Crawler
Front Axle Outer Snap Ring MC-12108 US$3.02 for two
Spindle Nut Kit MC-12004 US$17.00 for two
54mm Hub Socket MC-17100 US$19.95
Shifter Socket MC-10078 US$6.00
Heavy Duty Shifter Seat MC-10077 US$10.00
Heavy Duty Front Inner Axle Seal MC-12149 US$14.98 for two
Freight UPS Worldwide Expedited US$142.70

Terra
30-Spline Chromoly Super Set 30SPU US$645.00
Freight USPS US$155.00

Well, today I was planning on getting an Optima Red Top 34, but they didn't have any in stock. I was recommended an Exide Orbital, received good customer service and product knowledge, so that's what I got.
Any Power Batteries $320.00

I also didn't want an Australian made Battery, this one was made in Spain.

so you are all ready to come wheeling again net year

The Orbital is a sealed type?
They got a great write up in 4B monthly once upon a time.
Go that MudLux.

And curiousity - why not an Aussie battery?

Yes


Yes


In the past five years I've had to buy three Batteries, and they all lasted less than two years each.
I put an Exide Extreme in my BJ40.
I put a Bosch Silver into the Hilux, then an Exide Extreme.

Cool. My red top has done 4 years or so now - sealed ones just to keep on going

Back on Wednesday, I ordered my second iCOM IC-400PRO $388.00 from Prestige Communications, and I received it on Friday. Also yesterday I installed it, and today all I had to do was wire it up. It works.

John, wish I had seen this sooner, why did you go AVM hubs?
The stock hubs are way stronger.
You should at least carry the stock hubs with you when you go 4x4ing.